SAME DAY TURNAROUND! 

844.674.2411      E-mail: info@safetymanualosha.com
0
  • No products in the cart.
Total:$0.00

06 Sep

Posted at 13:08h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Head Injuries - After The Fall You can work for years and hardly get a scratch, then one day a fall can turn your life around. Fall injuries may cause abrasions, fractures and dislocations. However, one of the most serious results of a fall, other than death, can be a head injury. How this will affect you depends upon which part of your brain has been injured as a result of a fall or impact. Broken bones usually heal, but head injuries can result in life long serious problems, such as: Changes in personality, such as increased anxiety, depression or anger. ...

06 Sep

Posted at 12:45h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Forklift Safety-General Operating Rules Operating a forklift takes skill and knowledge. Forklift Safety is a key component to operating a forklift. The forklift operator and those around the operator must treat the forklift with proper respect. Using proper procedures, such as those listed below, will minimize the potential for accidents and injuries, as well as make your job easier. Pre-Trip Inspection: Check the following for proper condition and correct all deficiencies: Engine oil and other fluid levels Tire pressure Steering and hydraulic controls Warning devices Service and parking brakes Battery level Gauges and instruments Cable connections Fuel level and propane tank connections ...

02 Sep

Posted at 11:41h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
1 Like

Shop Safety Checklist The following are common, important safety guidelines to remember when working in the shop environmen. Follow this shop safety checklist: Under no circumstances should unapproved people be allowed to use the shop equipment. Do not allow unauthorized persons to visit or loiter in the shop. Secure the shop when no one is present. It goes without saying that you should never leave a machine in operation while it is unattended. Check emergency equipment such as first aid kits, emergency lighting, fire extinguishers and eye wash stations monthly. Periodically check all hand tools, portable power tools and larger shop...

01 Sep

Posted at 21:20h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
3 Likes

Welding On Galvanized Metals One of the most significant health hazards in the welding process is the generation of fumes and gasses. Do you weld on galvanized metals? Zinc is the coating used on galvanized metals, and when you heat the metal, it produces vaporized metal droplets which are called fumes. This is the smoky haze which consists of fine particles of metals or silicates. When you breathe these fumes, they may work deeply into your lungs. The typical effect of breathing zinc fumes is metal fume fever. One or two hours or more after welding-without proper personal protection-you may experience severe...

01 Sep

Posted at 13:54h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Reporting and Investigating Accidents You should be constantly alert to potential causes of accidents - before they happen. All unsafe acts or conditions should be reported to your supervisor immediately, even if no one was hurt! A complete accident investigation determines the following: What happened? When did it happen? Where did it happen? Who was involved? Why did it happen? How can it be prevented from happening again? The observations of co-workers can be critical. As a co-worker, you can assist in an investigation by: Making mental or written notes about the accident before the investigation starts. Avoid talking to others before talking...

30 Aug

Posted at 12:41h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Material Handling Material handling accounts for about one quarter of all occupational injuries; the most common injuries being strains, sprains and contusions. The principal causes of the injuries are the mishaps resulting from improper lifting, failing to use available equipment and unsafe work practices. Some pointers for the prevention of injuries during manual material handling are: Inspect the load to be lifted for jagged or sharp edges. Use gloves when necessary. Size up the load. Is it manageable, or will this task take two? Inspect the route where the load will be carried. Especially look for tripping hazards and adequate room to...

30 Aug

Posted at 12:32h in OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
0 Likes

Skin Protection Should be a Priority Skin protection is a necessity. The skin is the single largest organ of the body. The skin, when healthy, protects us from chemical, physical, and biological hazards. Skin weighs about 10% of our total body weight and is approximately one-eighth of an inch thick. The skin is made up of two layers, the epidermis (outer layer) and the dermis (inner layer). The outer layer of skin is only 1/250th of an inch thick and is the part of our skin that forms the protective barrier. There are many skin irritants that employees may be exposed to...

26 Aug

Posted at 11:14h in Safety Manual, Safety Meeting Topics, Safety Topics, Toolbox Talks, Toolbox Topics
0 Likes

Portable Light Strings Follow these precautions when using portable light strings: Inspect the wiring and fixtures before stringing the lights or before they are energized or plugged in. Make sure the outer insulation is not damaged, the plug ends are intact, and the fixtures are not cracked. The light-string must be grounded. Make certain the plug has a ground prong. Never cut one off. The quality of the ground must be tested frequently. A good ground could save your life if an electrical fault develops, especially when working in wet conditions or on metal structures. If a Ground Fault Interrupter (GFI)...

24 Aug

Posted at 10:48h in General Safety, OSHA, OSHA Safety, OSHA Training, Safety, Safety Manual, Safety Talk, Safety Toolbox Talks, Safety Toolbox Topics, Safety Topics, Tailgate Safety, Tool Box Talk, Toolbox Talk Topics, Toolbox Talks, Toolbox Topics
3 Likes

Employee Responsibility What is employee responsibilty? An effective Accident Prevention Program should include the defined responsibilities for management, supervisors, and employees. Management, by law, has responsibility for the safety and health of all employees as well as providing a safe workplace. Supervisors have responsibility for providing a safe work place as well as managing the production issues. Now we need to address employee responsibilities and what those entail. Employers and supervisors should expect the employees to be responsible. This starts with getting to work on time, working safely through the day, and addressing concerns to their supervisor. Suggested Areas of Responsibility Employees are responsible...

24 Aug

Posted at 10:16h in Safety Manual, Safety Meeting Topics, Safety Topics, Tailgate Safety Meetings, Toolbox Talks, Toolbox Topics
0 Likes

Safety Data Sheets - SDS's Safety Data Sheets - SDS’s are very important documents. Every workplace should have accessible SDS’s for all hazardous materials that are used or stored. Read the SDS before you begin using the material. If you have the responsibility for procuring hazardous material, you should obtain an advance copy of the SDS to review the safety information before the order is placed. Many companies require approval of hazardous materials before they are purchased. Everyone who uses it should review the SDS. You wouldn’t want to wait for an emergency to learn about he material’s hazardous properties! Suppose that...